Avoidance and toxicity responses of fish to intermittent chlorination

The ability of fish to actively avoid concentrations of chlorine in a steep, horizontal, laboratory-controlled gradient was found to be species-specific and dependent upon the acclimation temperature, water quality conditions, and the type of chlorine residual tested. Comparison of behavioral avoidances with the results from bioassays using some form of intermittent chlorination, as reported in the literature, indicated that LC₅₀ concentrations (levels that cause the mortality of half the test individuals in a designated time period) usually exceeded avoidance threshold concentrations.This chlorine avoidance study, which was carried out in a field laboratory that utilized New River water for holding and testing procedures, was located at the Glen Lyn power plant in southwestern Virginia. Two basic types of avoidance trials were employed, TRC (total residual chlorine) and chloramine (CRC) exposures. The TRC trials contained variable amounts of free (FRC) and combined residual chlorine (CRC) depending upon water quality, while in chloramine trials, the TRC exposure was mainly comprised of monochloramine with little or no FRC. The first significant avoidance in TRC trials for several fish species tested, varied from 0.05 mg/1 for coho salmon (Oncorhynchus kisutch) to 0.40 for channel catfish (Ictalurus punctatus). Low levels of hypochlorous acid (HOCl), which are considered to be a potentially toxic constituent of FRC, appeared to consistently influence the avoidance response. Initial avoidance concentrations to HOCl ranged from 0.01–0.02 mg/1 for coho salmon to 0.04–0.12 mg/1 for channel catfish, depending upon acclimation temperatures tested. The pH in river water was more influential than temperature in controlling the amount of HOCl present within the FRC at each TRC exposure. Avoidance responses by fish to CRC concentrations were either equal to or greater than TRC exposures and were dependent upon the ammonia-N content. Chloramine and FRC (specifically the HOCl fraction) have been reported to have different mechanisms of toxicity, which offered possible explanations for the differences observed in avoidance behavior. Chlorine residuals discharged from the Glen Lyn power plant in previous years have exceeded the LC₅₀ values reported for many species, although no major fish kills from chlorine have been documented. Behavioral avoidance responses by fish to potentially lethal chlorinated discharges in aquatic receiving systems may be a major mechanism of these populations in adapting to or interacting within these industrially influenced environments.     

The Demonstration of Remedial Action Technologies for Contaminated Land and Ground water

The problem of contamination to land and groundwater from improper handling of hazardous materials/ waste is faced by all countries. Also, the need for reliable, cost-effective technologies to address this problem at contaminated sites exists throughout the world. Many countries have only started to develop new innovative/ alternative technologies while others have already started to apply these technologies to the cleanup of contaminated sites. The purpose of this NATO/ CCMS (North Atlantic Treaty Organization/Committee for the Challenges to Modern Society) Pilot Study is to discuss and evaluate new innovative/alternative technologies and/or existing systems that may be applicable to the cleanup of contaminated sites. Through this pilot study, the exchange of information on new and existing technologies for dealing with problem hazardous waste sites is promoted. The pilot study is made up of an international group of experts drawn from the participating countries. The study, which was initiated in 1986, is planned to last five years. It is piloted by the United States and copiloted by the Federal Republic of Germany (FRG) and The Netherlands.

This report includes an overview and history of the NATO/CCMS Pilot Study, but it primarily presents a documentation of the NATO/CCMS Second International Conference on the Demonstration of Remedial Action Technologies for Contaminated Land and Groundwater held in Bilthoven, The Netherlands on November 7-11,1988.     

Development of a rotorcraft dust-emission parameterization using a CFD model

Flights of rotorcraft over the desert floor can result in significant entrainment of particulate matter into the atmospheric boundary layer. Continuous or widespread operation can lead to local and regional impacts on visibility and air quality. To account for this pollutant source in air quality models, a parameterization scheme is needed that addresses the complex vertical distribution of dust ejected from the rotorcraft wake into the atmospheric surface layer. A method to parameterize the wind and turbulence fields and shear stress at the ground is proposed here utilizing computational fluid dynamics and a parameterized rotor model. Measurements taken from a full scale experiment of rotorcraft flight near the surface are compared to the simulation results in a qualitative manner. The simulation is shown to adequately predict the forward detachment length of the induced ground jet compared to the measured detachment lengths. However, the simulated ground vortex widths and vorticity deviate substantially from the measured values under a range of flight speeds. Results show that the method may be applicable for air quality modeling assuming slow airspeeds of the rotorcraft, with advance ratios of 0.005–0.02.     

Multi-year hourly PM2.5 carbon measurements in New York: Diurnal,day of week and seasonal patterns

Multi-year hourly measurements of PM_2.5 elemental carbon (EC) and organic carbon (OC) from a site in the South Bronx, New York were used to examine diurnal, day of week and seasonal patterns. The hourly carbon measurements also provided temporally resolved information on sporadic EC spikes observed predominantly in winter. Furthermore, hourly EC and OC data were used to provide information on secondary organic aerosol formation. Average monthly EC concentrations ranged from 0.5 to 1.4 μg m^?3 with peak hourly values of several μg m^?3 typically observed from November to March. Mean EC concentrations were lower on weekends (approximately 27% lower on Saturday and 38% lower on Sunday) than on weekdays (Monday to Friday). The weekday/weekend difference was more pronounced during summer months and less noticeable during winter. Throughout the year EC exhibited a similar diurnal pattern to NO_x showing a pronounced peak during the morning commute period (7–10 AM EST). These patterns suggest that EC was impacted by local mobile emissions and in addition by emissions from space heating sources during winter months. Although EC was highly correlated with black carbon (BC) there was a pronounced seasonal BC/EC gradient with summer BC concentrations approximately a factor of 2 higher than EC. Average monthly OC concentrations ranged from 1.0 to 4.1 μg m^?3 with maximum hourly concentrations of 7–11 μg m^?3 predominantly in summer or winter months. OC concentrations generally correlated with PM_2.5 total mass and aerosol sulfate and with NO_x during winter months. OC showed no particular day of week pattern. The OC diurnal pattern was typically different than EC except in winter when OC tracked EC and NO_x indicating local primary emissions contributed significantly to OC during winter at the urban location. On average secondary organic aerosol was estimated to account for 40–50% of OC during winter and up to 63–73% during summer months.     

Assessment of bisphenol A released from reusable plastic, aluminium and stainless steel water bottles

Bisphenol A (BPA) is a ubiquitous high volume industrial chemical that is an estrogen and an environmental endocrine disrupting chemical. Bisphenol A is used extensively in the production of consumer goods, polycarbonate plastics, epoxy resins and coatings used to line metallic food and beverage cans. There is great concern regarding the possible harmful effects from exposures that result from BPA leaching into foods and beverages from packaging or storage containers. The objective of this study was to independently assess whether BPA contamination of water was occurring from different types of reusable drinking bottles marketed as alternatives to BPA-containing polycarbonate plastics. Using a sensitive and quantitative BPA-specific competitive enzyme-linked immunosorbent assay we evaluated whether BPA migrated into water stored in polycarbonate or copolyester plastic bottles, and different lined or unlined metallic reusable water bottles. At room temperature the concentration of BPA migrating from polycarbonate bottles ranged from 0.2 to 0.3 mg L⁻¹. Under identical conditions BPA migration from aluminium bottles lined with epoxy-based resins was variable depending on manufacturer ranging from 0.08 to 1.9 mg L⁻¹. Boiling water significantly increased migration of BPA from the epoxy lined bottles. No detectable BPA contamination was observed in water stored in bottles made from Tritan™ copolyester plastic, uncoated stainless steel, or aluminium lined with EcoCare™. The results from this study demonstrate that when used according to manufacturers’ recommendations reusable water bottles constructed from “BPA-free” alternative materials are suitable for consumption of beverages free of BPA contamination.     

Risk management is not enough: a conceptual model for resilience and adaptation-based vulnerability assessments

The US government has focused considerable attention on enhancing our society’s ability to protect critical systems and services from disruptive events. Over the past decade, federal agencies have bolstered their efforts to identify and minimize threats using traditional risk-based approaches such as continuity of operations and disaster risk reduction processes. However, these valuable risk identification and management tools are limited because they rely upon foreseeable factor analyses of steady-state systems with predictable hazard frequencies and severities. In assessing the capability of complex adaptive systems to cope with disruptions, an overemphasis upon engineering resilience through risk management and planning for what is predictable may cloud or detract from our efforts to better understand a system’s emergent capabilities to withstand disruptions that are unforeseeable. This article contends that augmenting traditional risk approaches through the incorporation of methodologies grounded in socio-ecological system (SES) resilience principles offers a potential avenue for improving our agencies’ abilities to assess and manage both known and unknown risks. We offer a notional rationale for broadening our examination of system vulnerabilities and present a conceptual model that combines engineering and SES resilience paradigms to facilitate the identification, assessment, and management of system vulnerabilities. The Military Installation Resilience Assessment model described herein applies risk and resilience principles to evaluate whole systems, focusing on interconnections and their functionality in facilitating response and adaptation.     

A Comparison of Bayesian Methods for Uncertainty Analysis in Hydraulic and Hydrodynamic Modeling

We evaluate and compare the performance of Bayesian Monte Carlo (BMC), Markov chain Monte Carlo (MCMC), and the Generalized Likelihood Uncertainty Estimation (GLUE) for uncertainty analysis in hydraulic and hydrodynamic modeling (HHM) studies. The methods are evaluated in a synthetic 1D wave routing exercise based on the diffusion wave model, and in a multidimensional hydrodynamic study based on the Environmental Fluid Dynamics Code to simulate estuarine circulation processes in Weeks Bay, Alabama. Results show that BMC and MCMC provide similar estimates of uncertainty. The posterior parameter densities computed by both methods are highly consistent, as well as the calibrated parameter estimates and uncertainty bounds. Although some studies suggest that MCMC is more efficient than BMC, our results did not show a clear difference between the performance of the two methods. This seems to be due to the low number of model parameters typically involved in HHM studies, and the use of the same likelihood function. In fact, for these studies, the implementation of BMC results simpler and provides similar results to MCMC. The results of GLUE are, on the other hand, less consistent to the results of BMC and MCMC in both applications. The posterior probability densities tend to be flat and similar to the uniform priors, which can result in calibrated parameter estimates centered in the parametric space.     

Intervention of pentoxifylline on silica-induced inflammatory reaction and apoptosis

Pentoxifylline (PTX) is a clinically used drug mainly for peripheral circulation improvement. This drug also possesses potent anti-inflammatory effects and was found to inhibit acute lung injury induced by chemical agents in animal models. Since it is also a potential apoptosis enhancer, this study was designed to examine the influence of PTX on silica-induced lung inflammation and pulmonary leucocyte apoptosis. Male Wistar rats were intratracheally instilled with either silica dust suspension or saline and intraperitoneally injected with saline or PTX. These treatments continued for six weeks and all rats were then sacrificed to obtain bronchoalveolar lavage cells and lavage fluid. Data demonstrated that PTX attenuated silica-induced lung injury in the rat model and this attenuation may possibly be attributed to its role in the enhancement of pulmonary apoptosis. As a known clinically safe drug, PTX may thus have potential use in the treatment of human silicosis.     

A perfect storm? Indigenous rights within a national REDD+ readiness process in Peru

Recurring disagreements during national preparations to reduce emissions from deforestation and forest degradation (REDD+) are contributing to policy reform at multiple scales. The objectives of this study are to (i) develop a general framework to characterise diverse stakeholder perspectives on REDD+ programme objectives and governance arrangements, and (ii) apply this framework to analyse key stakeholders involved in REDD+ readiness process of Peru: the Inter-ethnic Association for the Development of the Peruvian Rainforest (Asociación Interétnica de Desarrollo de la Selva Peruana, AIDESEP), the Peruvian government and the World Bank. As indigenous peoples strive to maintain their own traditions and priorities, a turbulent readiness process is helping to resolve long-ignored issues of indigenous rights and to make REDD+ programme governance structures more inclusive. The Peruvian government/World Bank approach to REDD+ is incompatible with that of AIDESEP, therefore parallel implementation will be required for them to co-exist. Although a diversity of participants has helped to check and balance the centralization of decision-making power over REDD+ programme development, a history of failed assurances and agreements point to a need to maintain vigilance as new laws, regulations and safeguards are implemented.